Power Mixer Accessories

PRODUCT SUMMARY

MIXER PADDLES

Mixer Paddles are available in 120, 140, 160 mm diameters where indicated by part number, except where otherwise noted.

Download PDF  |  BN Products-USA™ Mixer Paddle Compatibility Chart

• BNR001-120  |  BNR001-140  |  BNR001-160 - Designed for plasters, adhesive mortars, mortars, tile adhesives and fillers, best for sticky and viscous materials; Material Flow Bottom to Top; Connection M14 x 2 male threads.  Length = 60 cm (24")
• BNR002-57 - Designed for paints, lacquers, thin coatings, and ready-mix plaster; Material Flow Top to Bottom;  Diameter is 57 mm (2-1/4").  Designed for BNR6169 mixer or Drill chuck
• BNR003-120  |  BNR003-140  |  BNR003-160 - Designed for concrete, mortars, plasters, heat-insulating plasters, and epoxy resin with sand, best for heavy and high viscosity materials; Material Flow Top to Bottom; Connection M14 x 2 male threads. Length = 60 cm (24")
• BNR004-120  |  BNR004-140 - Designed for thinset, tile adhesive, grout, adhesive mortars, ready-mix mortars, pointing mortars, and fillers, best for small volumes on high speed mixers; Material Flow Bottom to Top; Connection M14 x 2 male threads. Length = 60 cm (24")
• BNR005-120 - Designed for plasters, adhesive mortars, tile adhesive and fillers, best for sticky and viscous materials.; Material Flow Bottom to Top; Connection M14 x 2 male threads. Length = 60 cm (24")
• BNR008-120K - Designed for concrete, cement, mortars, and grouts with aggregate less than 3/8" diameter. Also for gypsum lime plaster, fibrated aluminum roof coatings and paints; Not for highly viscous materials. Sold in pairs for the double mixer. Material Flow Top to Bottom; Connection 13 mm or ½" Hex Shank.  Length = 60 cm (24")  Designed for BNR6402K mixer
• BNR009-120  |  BNR009-140 - Designed for fillers, bitumen coatings, joint cement, epoxy-resin compounds, and grouting compounds, best for prevention of lump formation and lessens adding air into the mixture; Material Flow Parallel; Connection M14 x 2 male threads.  Length = 60 cm (24")
• BNR010-120  |  BNR010-140 - Designed for gypsum-lime plaster, fibrated aluminum roof coatings, and paints. This paddle can be disassembled in two pieces and fit into a carrying case; Material Flow Top to Bottom; Connection M14 x 2 male threads. Assembled Length = 60 cm (24")
• BNR012-160 -  Designed for Concrete, Thermal insulating plasters, Epoxy Resin with sand; Material Flow Bottom to Top; Connection M14 x 2 male threads.  Length = 60 cm (24")  Standard Replacement Paddle for BNR6500 Power Mixer
• BNR013-120 - Designed for Concrete, Cement, Grouts (aggregate < 3/8"); not for high-viscosity materials; Material Flow Top to Bottom; Connection 13 mm or ½” Hex Shank.  Length = 60 cm (24")  Sold in Pairs (L/R) as standard replacement for BNR6502 Dual Mixer

MIXING STAND REPLACEMENT PARTS

• BNMSB-SB - This is a replacement bucket and lid (22 Gallon capacity) for the BNMS-100B Mixing Stand and BNMS-6500 Mixing Station