DBS-16H In-Place 5/8″ #5 Rebar Bender
DBS-16H In-Place Rebar Cutter - Vertical View
PRODUCT SUMMARY
Note: This product is temporarily unavailable.
Please check this page at BNProducts.com for future updates.
- The DBS-16H is an electric/hydraulic tool used for bending rebar in-place; this tool weighs only 26.5 lbs., combining power with portability
- The 1-90 degree bending capacity takes less than four seconds and can be used on rebar up to #5 (5/8") grade 60; the bending radius is rated for 1.25" (R31)
- This tool draws less than 9 Amps and can easily be used with a standard 120V extension cord.
- It is the perfect tool for bending tails in block wall Construction!
PRODUCT LINKS
- For a printable DBS-16H Literature Sheet: CLICK HERE
- For a printable DBS-16H Product Manual: CLICK HERE
- For a printable DBS-16H Parts Guide: CLICK HERE
Close
BUY ONLINE | Available Now from these Distributors
| Maximum Bending Diameter | 5/8" (#5) Rebar (22mm) Grade 60 |
| Bending Angle / Speed | Up to 90 degrees / 4 seconds |
| Voltage/Amperage | 120V 50/60Hz / 11 amps / 1050 W |
| Tool Weight | 26.5 lbs (12 kg) |
| Dimensions L x W x H (mm) | 18.5" x 5.7" x 10.7 (470 x 145 x 270) |
